A laser sight is an invaluable tool among the diverse attachments available for gel blaster guns. While many blasters come with built-in flashlight accessories, others may require you to purchase and install one separately.
The GOOD NEWS? Customizing your gel ball gun with these gadgets with these laser light upgrades is generally straightforward, though the extent of modification can vary between models.
Personally, I lean towards scopes or red dot sights. However, my Nerf Pro Gelfire Mythic presents a unique challenge due to its top-fed hopper design. Attempting to put a laser sight or flashlight attachment on this blaster wasn’t practical, as the hopper obstructed the line of sight.
To tackle this hurdle, I got myself a Tactical Pistol Torch With Built-in Laser. Where did it go? Right under the outer barrel, taking my game to the next level! And hey, splatter ball guns like the SplatRBall SRB1200 have a drum mag instead of a hopper, making the installation process much easier.
In this article, I’ll unravel whether a laser attachment is good for you and the EXACT STEPS I follow to put it on a gel blaster. Get ready to amplify your experience as we navigate the intricacies of customization, upgrading your Orbeez gun into a real powerhouse.
Should You Get A Laser Attachment For Your Gel Blaster?
Ever seen a gel blaster with a laser beam attachment? LOOKS COOL, right? But here’s the thing: Do you really need one? Well, it all boils down to how you like to play. It is like your secret weapon for aiming without looking down the sights. In those crazy moments where you gotta act fast, just hip-fire and save those precious seconds to take down your opponent.
Now, if you’re more of a sniper type who always scopes in, you might not need this. But hey, if you’re not quite sure or you versatile playstyle, you can always get a scope with a laser attachment or flashlight kit and keep it turned off when you don’t need it.
Oh, and heads up— when trying to sneak up on your opponent, an activated laser accessory on your blaster can alert them to your presence. So, be mindful and consider all factors to choosing a suitable attachment for your gel ball gun.
After lots of trying and testing, here I present you the list of my personal favorites:
- Pinty Green Laser Sight Dot Scope: The best quality scope I have come across, compatible with most gel blasters with Picatinny rails. I installed this on my M4A1 blaster.
- Gelstorm Blaster Laser Accessory: This is also good and more economical. I’m using it on my Nerf Pro Gelfire Mythic.
Installing Laser On A Blaster: A Step-By-Step Guide
Equipping your gel blaster with a laser sight or flashlight accessory is a straightforward process, especially when the latter comes with Picatinny rails. These upgrades are typically UNIVERSAL, allowing you to easily equip them on your gun. Let me guide you through the steps, especially if you’re new to customizing gel ball guns.
1. Choose Your Laser Attachment
Of course, the first step is to acquire a suitable laser pointer for your blaster. Determine the type of sight you’d like to have. For example, you can opt for a simple sight or a 2-in-1 flashlight + laser combo attachment.
Furthermore, you don’t need to make a choice between a sight and a scope! You can equip your Orbeez gun with a telescopic sight featuring a laser pointer, as long as its design or hopper position doesn’t hinder your ability to aim down the scope.
2. Locate The Picatinny Rails
Check for attachment rails on your gel blaster. Most guns have these rails, located either on top of the barrel or underneath it—usually on the OPPOSITE side of the hopper and magazine. Some blasters even feature multiple Picatinny rails, including one or two small ones on the sides.
These rails usually come with grooves or ridge-like structures that interlock with those on the accessories. For the best placement of a laser attachment, especially one with a flashlight, consider mounting it under the barrel, unless your upgrade also includes a scope.
3. Equip It With A Laser Or Flashlight Sight
Now that you’ve located the Picatinny rails, it’s time to attach your new laser sight for gel blasters. Gently slide it into the desired position, ensuring that the grooves interlock properly. Typically, the sight will come with a tightening screw to secure it in place.
That’s all, it’s an easy peasy process! If you face any problem, troubleshoot your blaster and make it work.
What To Do If Your Blaster Doesn’t Have Picatinny Rails?
Installing a sight on your gel ball blaster is generally simple and easy. However, what if your Orbeez gun lacks a Picatinny rail? You can buy various types and sizes of rails or at a gel blaster store—just ensure they are compatible with your gun and can be easily equipped.
Installing The Rails
In case your blaster does not have a Picatinny rail, you can install it easily in most cases. Just buy a suitable rail (Personally, I prefer 7″ or 10″ rails for my guns) and a rail riser adaptor to fit the laser attachment. Here are the links-
- 10″ Aluminum Picatinny Rail for larger blasters- in case your Orbeez gun doesn’t have it.
- 7″ Aluminum Picatinny Rail for smaller toy guns.
- Rail Riser Adaptor to mount the laser attachment with better aesthetics, visibility, and control.
For example, I replaced the rail on my M4A1 blaster with one that features a scope holder on top. Once you’ve installed it, you can easily mount the laser following the steps I explained earlier.
Taping The Sight To The Barrel (Last Resort)
If your gel blaster cannot accommodate Picatinny rails, there’s a less visually appealing option—finding a makeshift way to put on the laser beam attachment, like taping it under the barrel. While this may not enhance the aesthetics, it serves as a last resort.
That’s not all! To minimize the visibility of the tape, try equipping a suppressor on the barrel and securing the sight with black tape. The tape blends almost seamlessly against its black body. Keep in mind that a suppressor is only necessary if your gel blaster doesn’t already have a black barrel or making too much noise.
Conclusion: Key Takeaways
Ready to level up your game? Check out all the attachments before you make a choice. For me, installing them on my gel blaster guns gave me a vibe of laser tag in neon-lit arenas. How exciting is that?!
What’s more? Those laser and flashlight accessories are usually available in the range of $10-$50—pretty affordable, right? If your splatter gun has a bottom-feed spring-loaded magazine, definitely consider it for some serious tactical vibes.
As you’ve learned, equipping a laser sight is pretty easy, regardless of the gel blaster you’re using. So, no worries, you won’t break a sweat giving your toy that slick new upgrade.
Get ready for some happy shooting games!